+86 15757350088 | +86 13511362662
LEARN MORE ABOUT OUR PRODUCTS
— Inner Tank: Stainless Steel 304 2B/316L
— Heat-exchange Coil: Double（Or Single） heat-exchange coil （SUS304/SUS316L/Red copper）
— Outer Tank: Galvanized steel (SUS201, SUS304, SUS316 are also available)
— Insulation layer: 50-100mm thick high density polyurethane foam
— Vacuum Tube: Three-target vacuum tube, anti-freezing heat pipe, Aluminium fin and heat-resisting silicon seal
— Heat-pipe Manifold: Red copper header Φ35X1.0mm, Aluminium alloy shell 2mm, high-density rockwool insulation
— Solar Pump Station & Expansion vessel: Pump station, high pressure expansion vessel 5L-50L
— Collector Bracket: Gray/ black aluminium alloy 1.8mm, universal bracket suitable for slope/ flat roof or wall installation
— Accessories: Thermostat electrical heater with regulator, Anode magnesium, T/P & Safety valve, copper connectors
— Rated Working Pressure: 7.0 Bar
— Anti-freezing Weather: < (-)40 ℃
Description
The split pressurized solar water heater consists of pressurized water tank, heat pipe pressurized collector,working pump station, expansion tank, etc. It is suitable for high-end residences such as villas. The solar collector can be installed on the roof and the water tank can be installed in the attic or basement. It is popular in Europe and the United States. The water tank can also be connected to other heat sources such as heat pumps or gas boilers. System capacity range: 100-1000L.
| Inner Tank | Stainless Steel 304 2B/316L |
| Heat-exchange Coil | Double（Or Single） heat-exchange coil （SUS304/SUS316L/Red copper） |
| Outer Tank | Galvanized steel (SUS201, SUS304, SUS316 are also available) |
| Insulation layer | 50-100mm thick high density polyurethane foam |
| Vacuum Tube | Three-target vacuum tube, anti-freezing heat pipe, Aluminium fin and heat-resisting silicon seal |
| Heat-pipe Manifold | Red copper header Φ35X1.0mm, Aluminium alloy shell 2mm, high-density rockwool insulation |
| Solar Pump Station & Expansion vessel | Pump station, high pressure expansion vessel 5L-50L |
| Collector Bracket | Gray/ black aluminium alloy 1.8mm, universal bracket suitable for slope/ flat roof or wall installation |
| Accessories | Thermostat electrical heater with regulator, Anode magnesium, T/P & Safety valve, copper connectors |
| Rated Working Pressure | 7.0 Bar |
| Anti-freezing Weather | < (-)40 ℃ |
| Warranty | 5years |
| Packing | Standard Export Packing |
| Payment Term | TT |
| Other free services | Free installation manual in Enalish,put logo on tank |
| Delivery Time | Delivery time within 10 days after receiving deposit |
Working Principle
Specialty
The solar collector can be installed on the roof and the water tank can be installed in the attic or basement.
Only the solar collector on the roof has no water tank, which is small and beautiful.
It can connect with water tap and work automatically with pressure0.6Mpa, bringing enjoyable washing experience.
Safety: P/T valve would release pressure and temperature to protect tank.
- KEEP IN TOUCH -
If you have any enquiry about quotation or cooperation, please feel free to email us at Sales@inlightsolar.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
